CZ300A Lathe

I purchased this lathe used from an estate and although I received the paperwork with the lathe, I found very little other information on it.

 

Searching the internet for information on this lathe has come up with some interesting finds. The model CZ300A is a part number used by various Chinese manufactures all for a slightly different model and configuration. If you search on this model you will come up with no less than 10 different configurations. I have not seen another lathe exactly like mine anywhere else. I did exchange e-mail with the Chizhou Household Machine Tools Works in China. This particular lathe was sold under their name and was sold as a deluxe model. It does have evidence of some hand scraping on the saddle and cross slides. Other than problems with the motor mount and motor itself I have not found any issues that could not be addressed with the lathe other than a crack in the compound dovetail. The metal is very thin where it is cracked and a damaged gib was possibly overtightened or something causing the damage. It has not caused me a problem, but knowing that it is there I do take light cuts when using the compound if possible.

 

The specifications list the spindle taper at Morse 4 1/2. The taper is a very short Morse 5 but is only about 2 inches deep. Standard MT5 centers and collet adapters fit it fine.

It shares many features with the Grizzly G4016 and the Shop Fox M1019, but each of those have a slightly different headstock.

Based on the Date on the accuracy report, and the date stamped on the 3 Jaw chuck, this late was manufactured in June 1993 by the Chizhou Household Machine Tools Works in Anhui China.

 

CZ-300A Manual

CZ-300A Accuracy Report

 

Leave a Reply